Saftronics VG10 - Dynamic Torque Vector AC Drive
(Obsolete FINCOR Series 6600)

• Saftronics VG10 - Dynamic Torque Vector AC Drives
• Pricing, Dimensions & Weights
• Optional DC Link Reactors
• Options & Accessories
  • Palm Pilot Saflink Kit
  • Relay Output Card
  • SR10 Radio Modem Kit
  • Digital I/O Interface Card
  • Analog I/O Interface Card
  • SF-10 Ethernet Module
  • PGX Encoder Feedback Card
  • Encoder + Analog Output Card
  • PG Feedback Card (VG10 only)
  • PG Feedback Card (VG10 only)
  • Synchronized Operation Card (VG10 only)
  • 24 VDC or 24/120 VAC Interface Card Kit (PC10, GP10 or VG10 Inverter)
  • Air Pressure Sensor + V/I Converter Output Card
• SDBU - Dynamic Brake Module
  • 208-230V Dynamic Brake Packages
  • 460V Dynamic Brake Packages
• Ratings Efficiency & Watts Loss (230, 460VAC)
• Standard Specifications
• For Drive Dimension Sheets, contact Joliet Technologies
  • DC Link Reactor 100 HP and Above
• Basic Connection Diagrams
  • Basic Connection Diagram (Sink Logic, Mainly America)
  • Basic Connection Diagram to PLC (Sink Logic, Mainly America)
  • Basic Connection Diagram (Source Logic, Mainly Europe)
  • Basic Connection Diagram to PLC (Source Logic, Mainly Europe)
• For Spare Parts, contact Joliet Technologies

Options & Accessories

Name	PG Feedback Card (VG10 only)
Part Number	SOPCG11SPG2
Function	To perform speed control by detecting motor rotating speed using a pulse generator.
Specifications	Control Speed Control Range 3 to 3600 RPM (for 4-pole motor) Speed Control Accuracy +/- 0.02% Starting Torque 150% zero-speed (at ZERO signal ON) short time Maximum number of input pulse 100 kp/s   Applicable Encoder (Generator) Output Pulse 20 to 3000 P/R (A, not A, B not B) PG Power Supply +5 VDC +/- 10%/200 mA Maximum Response Frequency 100 kHz   Input Terminal PI Pg External Power Supply Input PO PG Power Supply Output CM Common YA Input Feedback PH Phase A (+) Pulse *YA Input Feedback PG Phase A (-) Pulse YB Input Feedback PG Phase B (+) Pulse *YB Input Feedback PG Phase B (-) Pulse Power Source Internal Power Supply +5VDC +/-10% / 200mA1 External Power Supply 5 VDC +/-10% (1) Please use an external power supply when you exceed 200mA.
Connection Diagram

To purchase any Saftronics drives or information, contact us at: 
Phone (815) 725-9696, 
Toll Free (866) 492-9888,
Fax (815) 725-9393 or 
E-mail info@joliettech.com