All Saftronics Drives are Obsolete

If you need a replacement for an existing Saftronics drive, complete the following form and we will send you a quote for a suitable replacement.

* Required Fields

Your Name *:

Email Address *:

Phone Number:

Complete Saftronics Part Number *:

Application (pump, fan, etc.) *:

Is an encoder or tachometer being used for speed feedback to the drive? *: YesNo

Any other options being used? (if known) *:

I want to receive mailings from Joliet Technologies, L.L.C.: YesNo

(Obsolete) Saftronics VG10 – Dynamic Torque Vector AC Drive
(Obsolete FINCOR Series 6600)

Options & Accessories

NamePGX Encoder Feedback Card

Part Number

FunctionTo perform speed control by interfacing with a pulse generator (encoder).

ControlSpeed Control Range1 :1200 (3 to 3600 RPM)
Maximum Speed3600 RPM (120Hz)
Speed Control Accuracy+/- 0.02%
Speed Control Response40 Hz
Applicable Encoder (requirements)No. of output pulses100 to 3000/Rev. A/B phse (inc.)
Maximum Response Freq.100 kHz
Pulse Output MethodRS422
Input TerminalXA, *XA, XB, *XB, XZ, *XZConnect phase +A, -A and phase +B, -B and signal +Z, *Z of encoder
Output Terminal+5V +/-1%, COM @ 200mAPower Supply for encoder
(Note:Either the 5V or the 12V supply may be used, but not both)
+12V +/-1%, COM @ 300mA
D1 and D2 Jumper SettingsNormal: Motor Direction CCW
looking at motor shaft.
Sets encoder signal(s) direction
Reverse: Motor direction CW looking at motor shaft.

Connection Diagram

Saftronics VG10 - PGX Encoder Feedback Card

To purchase any Saftronics drives or information, contact us at:
Phone (815) 725-9696,
Toll Free (866) 492-9888,
Fax (815) 725-9393 or

Call for availability of drives, and freight options. (815) 725-9696

All prices are subject to change without notice.

Print Friendly