Saftronics VG10 - Dynamic Torque Vector AC Drive
(Obsolete FINCOR Series 6600)

• Saftronics VG10 - Dynamic Torque Vector AC Drives
• Pricing, Dimensions & Weights
• Optional DC Link Reactors
• Options & Accessories
  • Palm Pilot Saflink Kit
  • Relay Output Card
  • SR10 Radio Modem Kit
  • Digital I/O Interface Card
  • Analog I/O Interface Card
  • SF-10 Ethernet Module
  • PGX Encoder Feedback Card
  • Encoder + Analog Output Card
  • PG Feedback Card (VG10 only)
  • PG Feedback Card (VG10 only)
  • Synchronized Operation Card (VG10 only)
  • 24 VDC or 24/120 VAC Interface Card Kit (PC10, GP10 or VG10 Inverter)
  • Air Pressure Sensor + V/I Converter Output Card
• SDBU - Dynamic Brake Module
  • 208-230V Dynamic Brake Packages
  • 460V Dynamic Brake Packages
• Ratings Efficiency & Watts Loss (230, 460VAC)
• Standard Specifications
• For Drive Dimension Sheets, contact Joliet Technologies
  • DC Link Reactor 100 HP and Above
• Basic Connection Diagrams
  • Basic Connection Diagram (Sink Logic, Mainly America)
  • Basic Connection Diagram to PLC (Sink Logic, Mainly America)
  • Basic Connection Diagram (Source Logic, Mainly Europe)
  • Basic Connection Diagram to PLC (Source Logic, Mainly Europe)
• For Spare Parts, contact Joliet Technologies

Options & Accessories

Options & Accessories

The drive supports two internally mounted cards. One option card is mounted under the main cover (location A) and the other option card is mounted in a special adapter under the keypad (location B), refer to option card instruction manual for mounting information. There are two different types of option cards, Type 1 and Type 2. Two Type 1 or two type 2 cards cannot be used at the same time. Combinations of Type 1 and Type 2 may be used as long as there is only one per mounting location and follows the chart below. Each option card must be mounted in the designated location. The chart below lists the option card, their type and their mounting location. 

Name	Type	Loc	2nd Option Type/Loc	Function
SOPCG11SRY (Relay output card)	1	A	2/B	- Relay output card The transistor output from the drive controls output terminals Y1 through Y4 which are converted to the relay outputs (1 SPDT, 3A. 250 VAG).
SOPCG11SDIO (Digital interface card)	2	A	None	- Frequency setting by binary code (max. 16 bits) - Monitoring (8 bits) of frequency, output current, and output voltage
SOPCG11SAIO (Analog interface card)	2	A	None	- Auxiliary input for analog frequency setting (0 to +1  10 V) - Monitoring of drive output frequency, current, and torque in analog voltage

SOPCG11SPG (VG1 0 only) (PG Feedback Card)

1

A

2/B

- This will enable vector control by pulse generator feedback signal  - Proportional operation, tuning operation (12/15 V; A, B Signal)

SOPCG11SPG2 (VG10 only) (PG Feedback Card)

1

A

2/B

- This will enable vector control by pulse generator feedback signal - Proportional operation, tuning operation (5V; A, A-, B, B- Signals)

SOPCG11SCIO (Interface card)

2

A

2/B

- 115 VAC Controi input, an isolation amplifier, relay output PG encoder

SOPCG11SLON (Communication Card)	2	B	1/A	- Serial communication card for LonWorks
SOPCG11SPDP (Communication Card)	2	B	1/A	- Serial communication card for Profibus-DP

SOPCG11SDEV (Communication Card)	2	B	1/A	- Serial communication card for Device Net
SOPCG11SCOP (Communication Card)	2	B	1/A	- Serial communication card for CAN
SOPCG11SMBP (Communication Card)	2	B	1/A	- Serial communication card for Modbus Plus
SOPCG11SIBS (Communication Card)	2	B	1/A	Serial communication card for Interbus-S
SHE300GEN150 (Communication Card)	2	B	1/A	- Serial communication card for Genius
SOPCG11SSY (VG10 only) (Operation Card)	1	A	2/B	- Two motors are driven synchronously
100-0164-01 (PG Feedback Card / Analog Card)	1	A	2/B	- To perform speed control by interfacing with a pulse generator encoder and to provide two precision analog outputs that can represent two types of data (output frequency, output current, etc.)
100-0170-01 (PGX Feedback Card)	1	A	2/B	- To perform speed control by interfacing with a pulse  generator (5/12V; A, A-, B, B- Signals)
SOPG11SP1 (Communication Card)	2	B	1/A	- Serial communication card for Siemens
100-0175-01 (Sleep Function)	2	A	None	- Monitors 3 Independent lIP functions and provides 3 for MC Relay outputs for control functions, such as sleep function, high/low torque level or Ref loss.
100-0171-01 (120V Card)	2	A	None	24VDC 1120 VAC input control circuitry

To purchase any Saftronics drives or information, contact us at: 
Phone (815) 725-9696, 
Toll Free (866) 492-9888,
Fax (815) 725-9393 or 
E-mail info@joliettech.com