Saftronics VG10 - Dynamic Torque Vector AC Drive
(Obsolete FINCOR Series 6600)

• Saftronics VG10 - Dynamic Torque Vector AC Drives
• Pricing, Dimensions & Weights
• Optional DC Link Reactors
• Options & Accessories
  • Palm Pilot Saflink Kit
  • Relay Output Card
  • SR10 Radio Modem Kit
  • Digital I/O Interface Card
  • Analog I/O Interface Card
  • SF-10 Ethernet Module
  • PGX Encoder Feedback Card
  • Encoder + Analog Output Card
  • PG Feedback Card (VG10 only)
  • PG Feedback Card (VG10 only)
  • Synchronized Operation Card (VG10 only)
  • 24 VDC or 24/120 VAC Interface Card Kit (PC10, GP10 or VG10 Inverter)
  • Air Pressure Sensor + V/I Converter Output Card
• SDBU - Dynamic Brake Module
  • 208-230V Dynamic Brake Packages
  • 460V Dynamic Brake Packages
• Ratings Efficiency & Watts Loss (230, 460VAC)
• Standard Specifications
• For Drive Dimension Sheets, contact Joliet Technologies
  • DC Link Reactor 100 HP and Above
• Basic Connection Diagrams
  • Basic Connection Diagram (Sink Logic, Mainly America)
  • Basic Connection Diagram to PLC (Sink Logic, Mainly America)
  • Basic Connection Diagram (Source Logic, Mainly Europe)
  • Basic Connection Diagram to PLC (Source Logic, Mainly Europe)
• For Spare Parts, contact Joliet Technologies

Options & Accessories

Name	Encoder + Analog Output Card
Part Number	100-0164-01
Function	To perform speed control by interfacing with a pulse generator (encoder) and to provide Two (2) precision analog outputs that can represent 9 types of data (output frequency, output current, etc.)
Specifications	Control Speed Control Range 1 : 1200 (3 to 3600 RPM) Maximum Speed 3600 RPM (120 Hz) Speed Control Accuracy +/- 0.02% Speed Control Response 40 Hz Applicable Encoder (requirements) No. of output pulses: 100 to 3000/ Rev. NB phase (inc.) Maximum Response Freq. 100 KHz Pulse Output Method Totem pole / Open collector (Min. output current 7mA)  Input Terminal XA, XB, CM Connect A and B phase of encoder XZ, CM Connect Z output signal of encoder Output Terminal + 12V, CM Power Supply for encoder (maximum of 300 mA,) Analog signal output (2 points) A01 and COM, A02 and COM Terminal A01: voltage output 0 to +/-10VDC @ 2 mA max. Terminal A02: voltage output 0 to +/- 10VDC @ 2 mA max. Terminal COM: voltage output common. Note - Analog output resolution: 11 bits (10 bits + sign)
Connection Diagram

Call for availability of drives, and freight options. (815) 725-9696

All prices are subject to change without notice.

To purchase any Saftronics drives or information, contact us at: 
Phone (815) 725-9696, 
Toll Free (866) 492-9888,
Fax (815) 725-9393 or 
E-mail info@joliettech.com