Saftronics VG10 - Dynamic Torque Vector AC Drive
(Obsolete FINCOR Series 6600)

• Saftronics VG10 - Dynamic Torque Vector AC Drives
• Pricing, Dimensions & Weights
• Optional DC Link Reactors
• Options & Accessories
  • Palm Pilot Saflink Kit
  • Relay Output Card
  • SR10 Radio Modem Kit
  • Digital I/O Interface Card
  • Analog I/O Interface Card
  • SF-10 Ethernet Module
  • PGX Encoder Feedback Card
  • Encoder + Analog Output Card
  • PG Feedback Card (VG10 only)
  • PG Feedback Card (VG10 only)
  • Synchronized Operation Card (VG10 only)
  • 24 VDC or 24/120 VAC Interface Card Kit (PC10, GP10 or VG10 Inverter)
  • Air Pressure Sensor + V/I Converter Output Card
• SDBU - Dynamic Brake Module
  • 208-230V Dynamic Brake Packages
  • 460V Dynamic Brake Packages
• Ratings Efficiency & Watts Loss (230, 460VAC)
• Standard Specifications
• For Drive Dimension Sheets, contact Joliet Technologies
  • DC Link Reactor 100 HP and Above
• Basic Connection Diagrams
  • Basic Connection Diagram (Sink Logic, Mainly America)
  • Basic Connection Diagram to PLC (Sink Logic, Mainly America)
  • Basic Connection Diagram (Source Logic, Mainly Europe)
  • Basic Connection Diagram to PLC (Source Logic, Mainly Europe)
• For Spare Parts, contact Joliet Technologies

Options & Accessories

Name	PGX Encoder Feedback Card
Part Number	100-0170-01
Function	To perform speed control by interfacing with a pulse generator (encoder).
Specifications	Control Speed Control Range 1 :1200 (3 to 3600 RPM) Maximum Speed 3600 RPM (120Hz) Speed Control Accuracy +/- 0.02% Speed Control Response 40 Hz Applicable Encoder (requirements) No. of output pulses 100 to 3000/Rev. A/B phse (inc.) Maximum Response Freq. 100 kHz Pulse Output Method RS422   Input Terminal XA, *XA, XB, *XB, XZ, *XZ Connect phase +A, -A and phase +B, -B and signal +Z, *Z of encoder   Output Terminal +5V +/-1%, COM @ 200mA Power Supply for encoder (Note:Either the 5V or the 12V supply may be used, but not both) +12V +/-1%, COM @ 300mA   D1 and D2 Jumper Settings Normal: Motor Direction CCW looking at motor shaft. Sets encoder signal(s) direction Reverse: Motor direction CW looking at motor shaft.
Connection Diagram

To purchase any Saftronics drives or information, contact us at: 
Phone (815) 725-9696, 
Toll Free (866) 492-9888,
Fax (815) 725-9393 or 
E-mail info@joliettech.com 

Call for availability of drives, and freight options. (815) 725-9696

All prices are subject to change without notice.