Saftronics GP10 - General Purpose Open Loop Vector AC Drive
(Obsolete FINCOR Series 5700)

• Saftronics GP10 - General Purpose Open Loop Vector AC Drives
• Pricing, Dimensions & Weights
• Optional DC Link Reactors
• Options & Accessories
  • Palm Pilot Saflink Kit
  • SR10 Radio Modem Kit
  • Relay Output Card
  • Digital I/O Interface Card
  • Analog I/O Interface Card
  • SF-10 Ethernet Module
  • GP10 / VG10 24 VDC or 24/120 VAC Interface Option Card
  • Sleep Function + Reference Loss + Over / Under Torque Detection Option Card Kit
  • 24 VDC or 24/120 VAC Interface Card Kit (PC10, GP10 or VG10 Inverter)
  • Air Pressure Sensor + V/I Converter Output Card
  • HMI Pump Controller
• SDBU - Dynamic Brake Module
  • 208-230V Dynamic Brake Packages
  • 460V Dynamic Brake Packages
• Ratings Efficiency & Watts Loss (230, 460VAC)
• Standard Specifications
• For Dimension Sheets, contact Joliet Technologies
• Basic Connection Diagrams
  • Basic Connection Diagram (Sink Logic, Mainly America)
  • Basic Connection Diagram to PLC (Sink Logic, Mainly America)
  • Basic Connection Diagram (Source Logic, Mainly Europe)
  • Basic Connection Diagram to PLC (Source Logic, Mainly Europe)
• For Spare Parts, contact Joliet Technologies

Options & Accessories

Name	Analog I/O Interface Card
Part Number	SOPCG11SAIO
Function	3 analog inputs (2 voltage inputs and 1 current input): Torque limiting value (driving, braking), frequency setting, ratio setting can be input respectively. 2 analog outputs (1 voltage output and 1 current output): 11 types of data can be output.
Specifications	Input Analog signal input (3 point) 32 and 31, 22 and 21, C2 and 21 Terminal 32: Voltage input (both sides): 0 to +10 VDC / 0 to +100%, input impedance 22k ohm Terminal 22: Voltage input (both sides): 0 to +10 VDC / 0 to +100%, input impedance 22k ohm Terminal C2: Current Input: 4 to 20mADC / 0 to +100%, input impedance 250k ohm For voltage input, power supply terminal for variable resistor (P10) should be connected Related function code o22 Output Analog signal input (2 point) between AO+ and AO-, CS+ and CS Terminal AO+:Voltage output 0 to +10 VDC, for max. 2 voltmeters, input impedance: 10 k ohm Terminal AO-: Voltage output common. Terminal CS+: Current output: 4 to 20mAdc, max. 500 ohm Terminal CS-: Current output common (Terminal CS- is isolated from terminal 21, 31 and AD-) Related function code 023
Connection Diagram

To purchase any Saftronics drives or information, contact us at: 
Phone (815) 725-9696, 
Toll Free (866) 492-9888,
Fax (815) 725-9393 or 
E-mail info@joliettech.com

Call for availability of drives, and freight options. (815) 725-9696

All prices are subject to change without notice.