Commander SE
|
 |
Simplicity with Function
|
COMMUNICATION CABLE
 Using a special RS232 to RS485 converter you can connect the PC to the RJ45 serial port on the front of the drive. A special pre-made cable is available from Control Techniques for this purpose - this CT comm cable is used with other Control Techniques products that use a RJ45 connector - such as the Commander SK and the Unidrive SP.
| Description |
Order Code |
| PC-to-drive Comms Cable |
CT Comms Cable |
QUICKEY / CLONING MODULE
 The QuicKey is a small, encapsulated memory module that stores the entire set of the
Commander SE parameter values. It plugs onto the drive near the control terminals. The
Commander SE may be programmed to download / upload a set of parameters to /
from the QuicKey or to operate with or without the module installed. Once the information is
stored in the QuicKey, it may be removed from the drive for future use such as cloning
other drives or programming a replacement drive.
| Description |
Order Code |
| QuicKey Cloning MOD |
SE55 |
Information provided by Control Techniques, a world leader in the design, production
and marketing of electronic drives for the control of electric motors.
Operator Interfaces
OPERATOR INTERFACE UNIT
These operator interface units complement the Control Techniques product line by
offering an impressive way of accessing parameters and adding more programming power to your application. The following features make these screens a simple and
impressive solution for you... and your customers:
- Graphical full color and 4-tone monochrome touchscreen
- Menus, submenus, alarms, fault conditions,
- Realtime trends and graphs
- Scheduling and background programs
- Modbus RTU and Modbus TCP/IP
- import pictures and graphics
- Advanced Recipe capabilities
For more information, refer to the Accessories Section.
Information provided by Control Techniques, a world leader in the design, production
and marketing of electronic drives for the control of electric motors.
|
1724 Tomich Court