| Relay Output Card |
SOPCG11SRY |
$ CALL |
| Digital Interface Card |
SOPCG11SDI0 |
$ CALL |
| Analog Interface Card |
SOPCG11SAI0 |
$ CALL |
| Profibus DP Serial Communication |
SOPCG11SPDP |
$ CALL |
| DeviceNet Serial Communication |
SOPCG11SDEV |
$ CALL |
| Modbus Plus Serial Communication |
SOPCG11SMBP |
$ CALL |
| Interbus S Serial Communication |
SOPCG11SIBS |
$ CALL |
| LONWorks Communication |
SOPCG11SLON |
$ CALL |
| Custom 1/0 Card (Isolation Card) |
SOPCG11SCIO |
$ CALL |
| MetaSys N2 Communication |
SOPCG11SMN2 |
$ CALL |
| Genius Communication |
SHE300GEN150 |
$ CALL |
| Siemens Serial Communication |
SOPCG11SP1 |
$ CALL |
| SF10 Ethernet Module |
046-7034 |
$ CALL |
| Control Net (External DIN Rail Mount) |
C/F |
$ CALL |
| 120/24V I/P Board with 4 Relays (External Mount) |
043-0303 |
$ CALL |
| 120/24V IP Board |
100-0171-01 |
$ CALL |
| Pressure Transducer Card with 4-20mA Outputs |
100-0163-01 |
$ CALL |
| Sleep Function / Ref Loss Card |
100-0175-01 |
$ CALL |
| HMI Pump Controller |
043-0906 |
$ CALL |
The drive supports two internally mounted cards. One option card is mounted under the
main cover (location A) and the other option card is mounted in a special adapter under the
keypad (location B), refer to option card instruction manual for mounting information.
There are two different types of option cards, Type 1 and Type 2. Two Type 1 or two type 2 cards
cannot be used at the same time. Combinations of Type 1 and Type 2 may be used as long
as there is only one per mounting location and follows the chart below. Each option card
must be mounted in the designated location. The chart below lists the option card, their type
and their mounting location.
| Name |
Type |
Loc |
2nd Option
Type/Loc |
Function |
SOPCG11SRY
(Relay output card) |
1 |
A |
2/B |
- Relay output card
The transistor output from the drive controls output terminals Y1
through Y4 which are converted to the relay outputs (1 SPOT, 3A, 250 VAC). |
SOPCG11SDIO
(Digital interface card) |
2 |
A |
None |
- Frequency setting by binary code (max. 16 bits)
- Monitoring (8 bits) of frequency, output current, and output voltage |
SOPCG11SAI0
(Analog interface card) |
2 |
A |
None |
- Auxiliary input for analog frequency setting (0 to
+/-10 V)
- Monitoring of drive output frequency, current, and torque in
analog voltage |
SOPCG11SCIO
(Interface card) |
2 |
A |
2/B |
- 115 VAC Control input, an isolation amplifier,
relay output PG encoder |
SOPCG11SLON
(Communication Card) |
2 |
B |
1/A |
- Serial communication card for LonWorks |
SOPCG11SPDP
(Communication Card) |
2 |
B |
1/A |
- Serial communication card for Profibus-DP |
SOPCG11SDEV
(Communication Card) |
2 |
B |
1/A |
- Serial communication card for Device Net |
SOPCG11SCOP
(Communication Card) |
2 |
B |
1/A |
Serial communication card for CAN |
SOPCG115MBP
(Communication Card) |
2 |
B |
1/A |
- Serial communication card for Modbus Plus |
SOPCG11SIBS
(Communication Card) |
2 |
B |
1/A |
- Serial communication card for Interbus-S |
SHE300GEN150
(Communication Card) |
2 |
B |
1/A |
- Serial communication card for Genius |
SOPG11SP1
(Communication Card) |
2 |
B |
1/A |
- Serial communication card for Siemens |
100-0163-01
(Air Pressure Sensor VII Converter) |
2 |
A |
None |
- Air Pressure Sensor and VII Converter
This card provides a 4-20mA output signal with a 3-15PSI applied and
converters FMA and FMP to 4-20mA outputs |
100-0175-01
(Sleep Function) |
2 |
A |
None |
- Monitors 3 Independent I/P functions and provides 3 Form C
Relay outputs for control functions, such as sleep function, high/low
torque level or Ref loss. |
100-0171-01
(120V Card) |
2 |
A |
None |
24VDC + 24/120 VAC input control circuitry |
1724 Tomich Court