:: ABB ACS800 AC Variable Frequency Drive :: ABB VFD Standard Features / Available Options and Software ::

Joliet Technologies, L.L.C. - Variable Frequency Drive and Variable Speed Drive Systems and Controls - Return to home page.

Custom Search

:: Quick Tour :: Contact Us :: About Us ::

1x1 spacer gif

Call Toll Free (866) 492-9888

ABB ACS800 AC DRIVES

0.5 to 100Hp @ 208 to 240V
1.5 to 600Hp @ 380 to 500V

ACS 800 Features

Standard Features

  • UL and CUL
  • 80 Character Multilingual Alphanumeric Display
  • Intelligent Start-Up Assistant 
  • Adaptive Programming Block with twenty (20) PLC-like functions
  • Input Fusing and Fused Disconnect (ACS800-U2 only)
  • Three (3) Programmable Analog Inputs (Isolated as a group) (0.025%, 12bit)
  • Six (6) Programmable Digital inputs plus one (1) dedicated start interlock 
  • Two (2) Programmable Analog Outputs (Not Isolated) (0.1 %, 10bit) 
  • Three (3) Programmable Form C Relay Outputs
  • Run Enable
  • Adjustable Filters on Analog Inputs and Outputs
  • Input Speed Signals
    • Two (2) Current 0 (4) - 20 mA
    • One (1) Voltage +/- 0 (2)- 10VDC
    • Increase/Decrease reference Contacts
  • Start/Stop
    • 2 Wire (Dry Contact Closure)
    • 3 Wire (Momentary Dry Contacts)
  • Adjustable Current Limit
  • Adjustable Torque Limit
  • Nine (9) Supervision Functions
  • Electronic Reverse
  • Motor ID Run
  • Power Loss Ride-Through
  • DC Magnetizing Start (provides maximum starting torque)
  • DC Hold
  • Flux Braking
  • Flux Optimization
  • Fifteen (15) Preset Speeds
  • Three (3) Critical Speed Lockout Bands
  • Self-Tuning Speed Controller
  • Direct Torque Control (DTCTM)
  • Scalar Control
  • Automatic Reset Customer Selectable
  • Two (2) Independently Adjustable Accel and Decel Ramps
  • Linear or Adjustable "S" Curve Accel/Decel Ramps
  • Ramp or Coast to a Stop
  • Maximum Frequency Programmable up to 300 Hz (scalar and DTC mode)
  • Integral Programmable PID Setpoint Controller
  • Mathematical Functions on Analog Reference Signals
  • AC (R4 Frames & above) or DC (R2 & R3 Frames) Reactor
  • Integral Brake Chopper (R2 & R3 Frames)
  • Reference Trim
  • Brake Control
  • Master/Follower
  • Programmable Fault Functions for Protection:
    • AI<Min
    • Panel Loss
    • External Fault
    • Motor Thermal Protection
    • Stall
    • Underload
    • Motor Phase Loss
    • Ground Fault
    • Communications Fault
  • Preprogrammed Protections:
    • Overcurrent
    • Short Circuit
    • Overvoltage (Intermediate Circuit)
    • Undervoltage (Intermediate Circuit)
    • Input Phase Loss
    • Output Device and Control Board Overtemperature

Available Options

  • DDCS Communications Card RDCO-01/-02/-03
  • Analog I/O Extension Card RA10-01
  • Digital I/O Extension Card RD10-01
  • Pulse Encoder Interface RTAC-01
  • Fieldbus Adapter Modules
    • DeviceNet RDNA-01
    • Profibus-DP RPBA-01
    • Modbus Adapter RMBA-01
    • Interbus-S RIBA-01 (not available at time of printing) 
    • Modbus Plus RMBP-01 (not available at time of printing) 
    • Control Net RCNA-01 (not available at time of printing)
    • Ethernet RETA-01 (not available at time of printing)
  • Dynamic Braking Choppers (R4 through R8 Frames)
  • CE EMC Filters (1st and 2nd Environments) 
  • DriveWindow@-based Adaptive Programming Tool 
  • DriveWindow@-based Start-up and Programming Tool

Application Software

  • Pump/Fan Control
  • Extruder 
  • Spinning 
  • Traverse 
  • Centrifuge / Decanter

© 2004 ABB Inc. All rights reserved Specification and pricing subject to change without notice.

ACS800-US-03
Rev. B

Effective: 06/11/03
Supersedes: 10/07/02

Bookmark and Share

 
:: Home :: Blog :: RFQ :: Products :: Variable Frequency Drive :: DC Drives :: AC Drives :: Services :: Information :: Site Map ::

Joliet Technologies, L.L.C.
Toll Free (866) 492-9888
9x9 sq gray bullet 1724 Tomich Court 9x9 sq gray bullet Crest Hill, IL 60403
Phone: (815) 725-9696 9x9 sq gray bullet Fax: (815) 725-9393 9x9 sq gray bullet E-mail: info@joliettech.com

  Variable Frequency Drive (return to home page)
 
1x1
© Copyright Site designed & maintained by Joliet Technologies, L.L.C. All rights reserved.