Dynapar - Rotary Feedback products. Innovation, Customization, Delivery.

Dynapar
Innovation, Customization, Delivery

Dynapar encompasses the broadest line of trusted brands in motion feedback control, including Dynapar encoders and Hengstler brand incremental encoders and absolute rotary encoders, Northstar heavy-duty magneto-resistive and Heavy-Duty optical encoders and high-performance Harowe brand resolvers. Only Dynapar feedback solutions offer these world-class rotary feedback brands from one Global Supplier with 3 day delivery on most models for customer peace of mind.

Joliet Technologies is the preferred Dynapar Integrator for the Chicagoland area.


SLIM Tach® RL67 Incremental Rotary EncoderSLIM Tach® RL67 Incremental Rotary Encoder

Quick Specs…

  • Unique mechanical design for Reliance RPM™ motors
  • Rugged, zero-speed, magnetoresistive sensing technology is unaffected by grease, salt water, dust, and other common contaminants

Overview / Design Principle:

The hard anodized aluminum alloy frame provides strength, ruggedness, and corrosion resistance. The hardened encapsulated electronics offer outstanding reliability under heavy machine vibration and accidental impacts. The electronics range from +5 to +15 volts DC and include the latest in short circuit proof design on all output pins. High power, complementary, line driver outputs assure clean, crisp signals over long cable lengths. These outputs are compatible with most drives or other input devices. The advanced magnetoresistive sensing technology operates with an unparalleled immunity to grease, oil, salt water, dirt, fibers, and other contaminants. This eliminates the need to seal the encoder.

The compact SLIM Tach® RL67 adds only 1.5” to the motor length. Designed to maximize the ease of field installation, the RL67 retrofits onto older existing motors as well as new motors. In some cases, it may be necessary to change the accessory stub shaft in the motor. This stub shaft is also available from us.

The SLIM Tach® RL67 will mount directly in the 6.75” machined accessory recess of the 4.5” accessory flange found on the motor. This unique modular design mounts quickly and easily with no adapter plates, bearings, or flexible couplings. Installation can be completed in minutes, without gap adjustments or special tools. The encoder can be removed then reinstalled just as easily.

Features and Benefits:

  • Modular, bearingless, low profile “pancake” design adds only 1.5” to motor length
  • 5-15 VDC operation with bi-directional quadrature and signals, with high power differential line driver outputs
  • 64, 128, 256, 512, 1024 & 2048 pulses per revolution (PPR) with optional Index pulse
  • Up to 120°C operational temperature

Applications:

The SLIM Tach® RL67 heavy duty encoder is a breakthrough innovation in feedback technology. Incorporating dual mounting features, the RL67 was designed especially for Reliance Electric, Inc. RPM® AC or DC motors.

Standard Operating Characteristics

Code: Incremental
Pulses per Revolution: 60-2048
Phasing Sense: A leads B for Counter-Clockwise rotation (CCW) viewing encoder-mounted end
Quadrature Phasing: 90° ± 22°
Symmetry: 180° ± 54°
Index: 270° gated to falling B edge

Electrical

Input Voltage Requirement: 5-15 or 5-26 Volts DC
Current Requirement: With Electrical Option L or H: 45 mA typical per sensor module plus line driver load
With Electrical Option V or 5: 65 mA typical per sensor module plus line driver load
Output Signals: With Elec Option L or H: 5-15 V Line Driver, 150mA
With Elec Option V: 5-26 V Line Driver, 100mA
With Elec Option 5: 5V Line Driver, 150mA
Frequency Response: 0 – 120kHz Data & Index
Electrical Immunity: 2kV ESD, Reverse Polarity, Short Circuit
Connector: 10 pin industrial duty latching, sealed NEMA 4 &12, IP65

Mechanical

Shaft Speed: 5,000 RPM
Mounting Configuration: 4.5” diameter, 56 C motor face or accessory flange to meet NEMA MG1-4 standards or mounts directly in the 6.75” machined accessory recess of the 4.5” accessory flange found on Reliance RPM™ motors
Housing Material: Cast Aluminum
Acceleration Rate: 12,000 rpm/sec max
Shaft Length Required: 2.5” min
Allowable Shaft End-Play: ± 0.045”
Allowable Shaft Runout: 0.003” TIR

Environmental

Operating Temperature Range: Std: -40°C to +90°C; Extended: -40°C to +120°C
Storage Temperature Range: -40°C to +120°C
Humidity: to 98% RH (non-condensing)
Shock (Sensor Module): 1 meter drop test, 30 G’s Min
Vibration: 18 G’s @ 5-2000 Hz spectrum

Available Specifications:

Related Products & Resources:


For additional information or to receive a full-line catalog, contact your Dynapar representative at 1.800.873.8731 or visit their web site at: www.dynapar.com
Headquarters:1675 Delany Road • Gurnee, IL 60031-1282 • USA
Phone: 1.847.662.2666
Fax: 1.847.662.6633
Email: custserv@dynapar.com or dynapar.techsupport@dynapar.com
© 2009 Dynapar Corp. Printed in U.S.A. • Feedback Quick Reference Guide P/N# N-FLB130 (11/09) 5M


Call Joliet Technologies TODAY 

If you have any questions concerning Dynapar products, feel free to contact us:
Phone (815) 725-9696,
Toll Free (866) 492-9888,
Fax (815) 725-9393 or
E-mail info@joliettech.com


Joliet Technologies custom packages, integrates and engineers AC Variable Frequency Drives (VFD), DC Variable Speed Drives (VSD) and AC Drive Controllers using top of the line manufacturers, like ABB, Emerson-Control Techniques, Siemens and Saftronics (Fincor). Our custom drive packages are built to your specifications for your application. We specialize in large horsepower drive systems (500Hp and above). Call us at (815) 725-9696 or fax us at (815) 725-9393 or e-mail us or fill out an RFQ with your requirements. Serving the greater Chicagoland area and the World.