WEG CFW09 AC Variable Frequency Drives

1 HP to 500 HP

• CFW09 Overview
• CFW09 Hardware Description
• CFW09 NEMA 1 Enclosure Catalog Numbers & Prices
• CFW09 Options, Accessories & Prices
• CFW09 DB Resistors 10% & 20% Duty Cycle
• CFW09 Technical Data

CFW09 - OPTIONS and ACCESSORIES

Intelligent Operator Interface with double display (LED and LCD), plain English messages and COPY Function. Local or remote installation.		COMPLETE KEYPAD (STANDARD) HMI - CFW09 - LCD
NEMA 4/IP55 remote keypad, for installation on panel door or remote operator station in harsh environments, such as splashing or hose-directed water and windblown dust. Maximum cable length: 33ft (10m)		NEMA 4 REMOTE KEYPAD HMI - CFW09 - LCDN4
Frame for remote keypad mounting on panel door or operator station. Optional up to 15ft (5m) cable. Maximum cable length; 33 ft (10m)		REMOTE KEYPAD FRAME KIT KMR - CFW09
Cables with lengths (x) of 3.3, 6.6, 10, 15, 25 and 33ft (1, 2, 3, 5, 7.5 and 10m) 7.5 and 10m must use the KMRCFW09 frame kit. Special cables available upon request.		REMOTE KEYPAD CABLES CAB - HMI - 09 - X
RS-232 Serial Interface Module to connect the CFW09 to a PC or other equipment via a RS-232 Serial Link.		RS-232 SERIAL INTERFACE KCS - CFW09

WEG Superdrive is a windows based software program that allows serial (RS-232 or RS-485) communication between a PC and WEG Soft Starters and Variable Frequency Drives. Superdrive is an excellent programming, documentation and troubleshooting tool for WEG Soft Starters and VFD's. Superdrive is available for free download at www.wegelectric.com. Hardware accessories may be required, depending on the Soft Starter or VFD line. Not available for SSW06.

PC COMMUNICATION KIT KSD - CFW09

PLC-01 / PLC-02 : WEG lntegral PLC The PLC01/02 boards add important PLC (Programmable Logical Controller) functions to the CFW09, enabling the execution of complex logic program by using the digital and analog inputs and outputs as well as the digital and analog inputs and outputs of the own inverter whlch can be accessed by the user program. Functions include simple contacts and coils up to functions that uses floating point, such as sum, subtraction, multiplication, division, trigonometry, square root functions, etc. Other important functions are the PID blocks, high-pass and low-pass filters, saturation, comparison. All these functions operate with floating point. Besides the functions mentioned above, the PLC1 provides blocks for motor speed and motor position control, that is a trapezoidal-profile positioning and a S-profile positioning, speed reference generation with trapezoidal acceleration ramp, etc. (Note: when position functions used, the coupling of an encoder on motor shaft is required). All functions can interact with the user through the 100 programmable parameters that can be accessed directly through the inverter HMI. The texts and user units of the programmable parameters can be customized by the WLP>

PLC / MOTION CONTROL BOARD PLC 1.01 PLC 2.00

Ethernet IP KFB - EN ProfiBus DP KFB - PD DeviceNet KFB - DN	Function Configuration EBA... EBB... EBC EBE 01 02 03 01 02 03 04 05 01 02 03 01 Encoder Input * * * * * * * Encoder Output * * * RS-485 Serial Interface * * * * * 14 Bit A/D * * 14 Bit D/A's * * Isolated Analog Input * * * Isolated Analog Output * * * * Digital Inputs & Outputs + Thermistor (PTC) Input * * * * * * * * Internal Power Supply * * * *
I/O EXPANSION BOARDS EBA.0X - CFW09 EBB.0X - CFW09 EBC1.0X - CFW09 EBE.0X - CFW09

CFW09 - OPTIONS and ACCESSORIES

(!) Non-Stocked Item, consult WEG for availability
* Mobus RTU - Requires optional RS-232 or RS-485 Interface

Contact Joliet Technologies for Custom Drive Pricing.
Phone: (815) 725-9696 or
Toll Free: (866) 492-9888
Fax: (815) 725-9393
E-mail: info@joliettech.com
RFQ - Request for Quote

© WEG Industrias. All Rights Reserved.
Specifications and pricing subject to change without notice.