1000HP DC Traction Motor Drive, rated 600VAC input, 750VDC
output built for a Slurry Pump Application for Baker Hughes.
 A recent project we completed for BHI Fluids in Lafayette, LA. BHI
Fluids or Baker Hughes,
a leader in oilfield services, creates value for oil and gas producers by
providing practical technology to find, develop, produce and manage petroleum
reservoirs.
 DC
Drive
The drive, a Siemens
SIMOREG 6RA70 DC Master Variable Speed DC Drive mounted and wired in a Nema-4 "Stainless Steel" enclosure,
with a Nema-4 air conditioner. With a 1200 amp main circuit breaker, starters
for 10HP blower motor, 5HP Lube Oil Pump, a contactor for the strip heaters in
the motor, and a strip heater and thermostat for the drive cabinet. Wired
for bottom entry for incoming and outgoing wires. Also wired so that on low
pressure from the blower or lube oil pump, the drive will not turn on. The
contacts and the low-pressure switches were supplied by BHI.
Custom Control Panel
 Nema-4X Stainless Steel, with a purge system.
The panel included the following items:
- Lube Oil Pump Start Push Button
- Lube Oil Pump Stop Push Button
- Running Pilot Light
- Stopped Pilot Light
- Blower Start Push Button
- Blower Stop Push Button
- Drive Start Push Button
- Drive Stop Push Button
- Emergency Stop Push Button
- (3) "Alarm" Pilot Lights
- (1) Panel Meter with selector switch, scaled to read out Strokes / Min.,
Barrels / Min. and RPM of Motor
- (1) Speed Pot. With 3" Hand Wheel
To get a Quote for your specific requirements, Contact Joliet
Technologies today.
Call (815-725-9696),
Toll Free (866) 492-9888,
Fax (815-725-9393) or
E-mail your requirements and we will
prepare a detailed quote for your application.
Or fill out a Request for Quote.
|
1724 Tomich Court