Magnetek - Medium Voltage Soft Starters
HRVS-DN Features

Joliet Technologies is now offering the Magnetek Line of Soft Starters.

Magnetek HRVS-DN Medium Voltage Soft Starters 

• Application Specific Software and Applications 
• HRVS-DN Features

Motor & Starter Protection 

• Programmable maximum starts 
• Stall detection 
• Electronic overload with selectable curves 
• Electronic shear pin (jam) 
• Under current 
• Unbalanced current 
• Ground fault current 
• Phase loss and phase sequence 
• Over and under frequency 
• Under and over voltage 
• External faults (2 separate inputs) 
• Shorted SCR (Silicon Controlled Rectifier) 
• Load loss (motor not connected) 
• Over temperature 
• Power on without start signal 
• Open bypass contactor 

Starting & Stopping 

• Soft start and soft stop 
• Current limit 
• Pump control program 
• Torque and current control for optimized starting and stopping 
• Dual Adjust-2 start/stop settings for varying loads and two speed motors 
• Pulse start for high break-away torque 
• Linear acceleration (requires tach feedback) 

Interaction LCD Display 
Select from four languages: English, French, German and Spanish 

Control Circuitry 

• Multi-function programmable I/Os 
• Opto-isolated control inputs 
• Three form "C" output relays, 8A/250VAC 
  "Immediate"-upon Start 
  "End of Acceleration" 
  "Fault" programmable as Trip or Trip-Fail safe 
• Analog output 0/4-20mA, 0-10VDC 

Switchgear Options 

• Line Vacuum Contactor 
• Bypass Vacuum Contactor 
• Control Voltage: 110-220VAC, 110VDC 
• Special thick paint 
• MCT (Multi Cable Transit) 
• Fan system-increased cooling 
• Tin plated busbars 
• Halogen free and fire retardant materials 
• Main switch (On-load or Off-load) 
• Main fuses (with/without striker-pin indication) 
• Motor Protection Relay (MPR-2000 or MPC-2000) 
• C/T's and P/T's 
• Digital Power Meter (DPM-10) 
• L.V. control devices (selector switch, push buttons, indication lights) 
• NEMA rated enclosure Communication Protocols: Modbus, Profibus or Modbus-TCP/IP 
• Analog output card 

OEM Chassis Kit or Complete System  The Magnetek HRVS-DN can be ordered as a chassis type power and control module, or as a complete turnkey system.

Call Joliet Technologies TODAY   

If you have any questions concerning Magnetek's line of Soft Starters or related products, please contact us by: 
Phone (815) 725-9696,
Toll Free (866) 492-9888,
Fax (815) 725-9393 or 
E-mail info@joliettech.com

Joliet Technologies custom packages, integrates and engineers AC Variable Frequency Drives (VFD), DC Variable Speed Drives (VSD) and AC Drive Controllers using top of the line manufacturers, like ABB, Emerson-Control Techniques, Siemens, Fincor, Avtron and Magnetek. Our custom drive packages are built to your specifications for your application. We specialize in large horsepower drives (500Hp and above). Call us at (815) 725-9696 or fax us at (815) 725-9393 or e-mail us or fill out an RFQ with your requirements.