Magnetek - Medium Voltage Soft Starters
HRVS-DN Application Specific Software and Applications

Joliet Technologies is now offering the Magnetek Line of Soft Starters.

Magnetek HRVS-DN Medium Voltage Soft Starters 

• Application Specific Software and Applications 
• HRVS-DN Features

Application Specific Software 

Starting from Diesel Generator 
Wide 45-65 Hz auto-tracking frequency to overcome voltage and frequency instability. Designed especially for marine and off-shore industries, or any system operating from a generator. 

Synchronous Motor Starting 
Optional module allows you to utilize your existing synchronous motor.

Pump and Special Load Control 
Magnetek Soft Starters eliminate two major problems: 

1. Water Hammer During Stopping 
   The Pump Control feature enables selection between three voltage ramp-down curves or a torque curve, preventing a stall condition which eliminates Water Hammer. 
2. Over-Pressure During Starting 
   The Pump Control also enables selection between three voltage ramp-up curves, as well as a torque curve, to reduce peak torque.Current ramp is available for special loads. 

Marine & Offshore  Water and ballast pumps Refrigeration chillers and compressors  Hydraulic pumps and  power packs  Thrusters Main propulsion motors  Unique protection for corrosive environments  Generator ready-auto frequency tracking.  The HRVS-DN is Lloyds, DNV, and ABS tested.

Call Joliet Technologies TODAY   

If you have any questions concerning Magnetek's line of Soft Starters or related products, please contact us by: 
Phone (815) 725-9696,
Toll Free (866) 492-9888,
Fax (815) 725-9393 or 
E-mail info@joliettech.com

Joliet Technologies custom packages, integrates and engineers AC Variable Frequency Drives (VFD), DC Variable Speed Drives (VSD) and AC Drive Controllers using top of the line manufacturers, like ABB, Emerson-Control Techniques, Siemens, Fincor, Avtron and Magnetek. Our custom drive packages are built to your specifications for your application. We specialize in large horsepower drives (500Hp and above). Call us at (815) 725-9696 or fax us at (815) 725-9393 or e-mail us or fill out an RFQ with your requirements.