Dynapar
Innovation, Customization, Delivery
Dynapar encompasses the broadest line
of trusted brands in motion feedback control, including Dynapar encoders
and Hengstler brand incremental encoders
and absolute rotary encoders, Northstar heavy-duty magneto-resistive and
Heavy-Duty optical encoders and high-performance Harowe brand resolvers.
Only Dynapar
feedback solutions offer these world-class rotary feedback brands from
one Global Supplier
with 3 day delivery on most models for customer peace of mind. Joliet Technologies is the preferred Dynapar Integrator
for the Chicagoland area.
 SLIM Tach® RL67 Incremental Rotary Encoder
Quick Specs...
- Unique mechanical design for Reliance RPM™ motors
- Rugged, zero-speed, magnetoresistive sensing technology is unaffected
by grease, salt water, dust, and other common contaminants
Overview / Design Principle:
The hard anodized aluminum alloy frame provides strength, ruggedness, and
corrosion resistance. The hardened encapsulated electronics offer outstanding
reliability under heavy machine vibration and accidental impacts. The electronics
range from +5 to +15 volts DC and include the latest in short circuit proof
design on all output pins. High power, complementary, line driver outputs assure
clean, crisp signals over long cable lengths. These outputs are compatible
with most drives or other input devices. The advanced magnetoresistive sensing
technology operates with an unparalleled immunity to grease, oil, salt water,
dirt, fibers, and other contaminants. This eliminates the need to seal the
encoder.
The compact SLIM Tach® RL67 adds only 1.5” to the motor length.
Designed to maximize the ease of field installation, the RL67 retrofits onto
older existing motors as well as new motors. In some cases, it may be necessary
to change the accessory stub shaft in the motor. This stub shaft is also available
from us.
The SLIM Tach® RL67 will mount directly in the 6.75” machined accessory
recess of the 4.5” accessory flange found on the motor. This unique modular
design mounts quickly and easily with no adapter plates, bearings, or flexible
couplings. Installation can be completed in minutes, without gap adjustments
or special tools. The encoder can be removed then reinstalled just as easily.
Features and Benefits:
- Modular, bearingless, low profile “pancake” design adds only
1.5” to motor length
- 5-15 VDC operation with bi-directional quadrature and signals, with
high power differential line driver outputs
- 64, 128, 256, 512, 1024 & 2048 pulses per revolution (PPR) with optional
Index pulse
- Up to 120°C operational temperature
Applications:
The SLIM Tach® RL67 heavy duty encoder is a breakthrough innovation in
feedback technology. Incorporating dual mounting features, the RL67 was designed
especially for Reliance Electric, Inc. RPM® AC or DC motors.
Standard Operating Characteristics
Code: Incremental
Pulses per Revolution: 60-2048
Phasing Sense: A leads B for Counter-Clockwise rotation (CCW) viewing encoder-mounted
end
Quadrature Phasing: 90° ± 22°
Symmetry: 180° ± 54°
Index: 270° gated to falling B edge
Electrical
Input Voltage Requirement: 5-15 or 5-26 Volts DC
Current Requirement: With Electrical Option L or H: 45 mA typical per sensor
module plus line driver load
With Electrical Option V or 5: 65 mA typical per sensor module plus line
driver load
Output Signals: With Elec Option L or H: 5-15 V Line Driver, 150mA
With Elec Option V: 5-26 V Line Driver, 100mA
With Elec Option 5: 5V Line Driver, 150mA
Frequency Response: 0 - 120kHz Data & Index
Electrical Immunity: 2kV ESD, Reverse Polarity, Short Circuit
Connector: 10 pin industrial duty latching, sealed NEMA 4 &12, IP65
Mechanical
Shaft Speed: 5,000 RPM
Mounting Configuration: 4.5” diameter, 56 C motor face or accessory flange
to meet NEMA MG1-4 standards or mounts directly in the 6.75” machined
accessory recess of the 4.5” accessory flange found on Reliance RPM™ motors
Housing Material: Cast Aluminum
Acceleration Rate: 12,000 rpm/sec max
Shaft Length Required: 2.5” min
Allowable Shaft End-Play: ± 0.045”
Allowable Shaft Runout: 0.003” TIR
Environmental
Operating Temperature Range: Std: -40°C to +90°C; Extended: -40°C
to +120°C
Storage Temperature Range: -40°C to +120°C
Humidity: to 98% RH (non-condensing)
Shock (Sensor Module): 1 meter drop test, 30 G’s Min
Vibration: 18 G’s @ 5-2000 Hz spectrum
Available Specifications:
Related Products & Resources:
For additional information or to receive a full-line catalog, contact
your Dynapar representative at 1.800.873.8731 or visit their web site at: www.dynapar.com
Headquarters:1675 Delany Road • Gurnee, IL 60031-1282 • USA
Phone: 1.847.662.2666
Fax: 1.847.662.6633
Email: custserv@dynapar.com or dynapar.techsupport@dynapar.com
© 2009 Dynapar Corp. Printed in U.S.A. • Feedback Quick Reference
Guide P/N# N-FLB130 (11/09) 5M
Call Joliet Technologies TODAY
If you have any questions concerning Dynapar products,
feel free to contact us:
Phone (815) 725-9696,
Toll Free (866) 492-9888,
Fax (815) 725-9393 or
E-mail info@joliettech.com
Joliet Technologies custom packages, integrates and engineers
AC Variable Frequency Drives (VFD), DC Variable
Speed Drives (VSD) and
AC Drive Controllers using top of the
line manufacturers, like ABB, Emerson-Control Techniques, Siemens and Saftronics (Fincor). Our custom drive packages
are built to your specifications for your application. We specialize in large horsepower drive systems (500Hp and above). Call us at (815)
725-9696 or fax us at (815) 725-9393 or e-mail us or fill out an RFQ with your requirements. Serving
the greater Chicagoland area and the World.
|
1724 Tomich Court