Unidrive SP
Solutions Platform

• Overview / Typical Applications
• Features
• Ratings, Prices & Ordering - Wall Mount Drives
• Ratings, Prices & Ordering - Free Standing Cubicle Drives
• Unidrive SP Regen Mode
• Terminal Diagram and Terminal Description
• Specifications and Dimensions
• Options - Overview / Options at-a-Glance
• Operator Interface
• Power Accessories
• Option Modules - Feedback Modules
• Option Modules - Input / Output Modules
• Option Modules - Application / Programming Modules
• Option Modules - Communication Modules
• Drive Configuration and Programming
• Software Overview - Application Programming Software
• Pre-packaged Solutions for Unidrive SP

Drive Configuration and Programming

SMARTCARD

This is a standard feature that enables simple configuration of parameters in a variety of ways. The SmartCard can:

• 'Clone' a complete set of parameters for serial production
• Save multiple complete sets of parameters
• Set up an application as parameter differences from default
• Automatically save all user parameter changes for maintenance purposes
• Load complete motor map parameters
• Read/write SmartCard information from within SM-Applications and SM-Applications Lite programs.

The drive only communicates with the SmartCard when commanded to read or write, meaning the card may be "hot swapped".

COMMUNICATION CABLE

Using a special RS232 to RS485 converter you can connect the PC to the RJ45 drive. A special pre-made cable is available from Control Techniques for this purpose - this CT Comms Cable is used with other Control Techniques products that use a RJ45/RS485 connector such as the Commander SE and Commander SK.

The RJ45 socket is located under a small flap on the front of the Unidrive SP just below the keypad. The pin-out of this connector is described in the Unidrive SP User Guide.

Information provided by Control Techniques, a world leader in the design, production and marketing of electronic drives for the control of electric motors.