Avtron - Tachs, Tachometers, Encoders, Rotary Pulse Generators
Joliet Technologies is the preferred Avtron Integrator
for the Chicagoland area.
Tachs, Tachometers, Encoders, Rotary Pulse Generators
Heavy, Mill-Duty Encoders:
Setting the Air Gap on M285 SMARTachTM Sensors
 |
This
procedure assumes you have followed the instructions supplied with the pulse
generator for installing the rotor, the stator, and mounting the sensors into
the stator housing.
Make sure the motor is de-energized and the motor shaft is stopped before
setting the sensor air gap.
You will need a 7/16" Nut Driver to perform this procedure.
Step 1:
Loosen 7/16" Locknut until the Quick Release Pin slides toward motor shaft.
Step 2:
Tighten the Locknut securely.
|
 |
Step 3:
Pull the Quick Release Pin.
|
|
Step 4:
Pull Black Rubber Plug and insert it into slotted hole to keep dirt out of sensor.
Step 5:
Store Gapping Pin in round hole on sensor or in a tool box for safe keeping.
Tach Instruction Sheets can be found on the Avtron website.
The links below will open a new browser window of the Tach section on the Avtron
site.
M285 Instruction
Sheet
Questions on PDF? Visit FAQ's
on PDF
|
Call Joliet Technologies TODAY
If you have any questions concerning Avtron's Tachs, Encoders, and Pulse
Generators, please contact us by:
Phone (815) 725-9696,
Toll Free (866) 492-9888,
Fax (815) 725-9393 or
E-mail info@joliettech.com
Joliet Technologies custom packages, integrates and engineers
AC Variable Frequency Drives (VFD), DC Variable
Speed Drives (VSD) and
AC Drive Controllers using top of the
line manufacturers, like ABB, Emerson-Control Techniques, Siemens and Saftronics (Fincor). Our custom drive packages
are built to your specifications for your application. We specialize in large horsepower drives (500Hp and above). Call us at (815)
725-9696 or fax us at (815) 725-9393 or e-mail us or fill out an RFQ with your requirements.
|
1724 Tomich Court