Avtron - Adjustable Speed Drives and Drive Systems
Joliet Technologies is the preferred Avtron Integrator
for the Chicagoland area.
Adjustable Speed Drives and Drive Systems
Additional Products by
Industrial Automation Division
Avtron NetMaxTM EthernetTM
Module for AutoMaxTM Systems
|
|
The NetMax card, unlike other bridge
products being sold, is plugged directly into the AutoMax rack. It
provides access to any and all variables within the AutoMax system without
the bottleneck of the DCS network. Now you can easily access AutoMax data
with improved connectivity to HMI's, PLC's, Data Loggers, or other plant
controls. You can modernize your communication system and extend the life
of your AutoMax system. The Avtron NetMax card supports ModBus TCP, EGD
(GE), and Ethernet/IP implicit, explicit, PCCC Ethernet Protocols.
 Read More about it! View the sales literature in PDF
format. Questions on PDF? Visit FAQ's on PDF.
|
Key Product Features:
- Inserts directly into AutoMax rack
- Supports ModBus TCP, EGD (GE), and Ethernet/IP
implicit, explicit, PCCC Ethernet Protocols
- Copper and Fiber Connections
- 10/100 Mb/sec data speeds
- Supports floating point data
For more information: Contact us. |
Product Benefits:
- Extends life of AutoMax systems by connecting to
other networks.
- Several on-board industrial protocols to connect
with HMI's, PLC's, data logging systems, and drives.
- Seamless integration with AutoMax hardware and
software.
- High performance access to any and all variables
inside AutoMax rack.
|
NetMaxTM is a trademark of Avtron
Manufacturing, Inc.
EthernetTM is a trademark of Xerox Corporation.
AutoMaxTM is a trademark of Rockwell Automation.
Avtron VME EthernetTM Module
|
|
Modernize your system-wide communications without replacing
your current PLC hardware and software with Avtron's New VME Ethernet
Module. Designed for installation in a traditional VME Rack, the following
benefits will be realized:
- Seamless Integration with Legacy VME
PLC Systems.
- Easy Set-up with little PLC
programming required to integrate Ethernet into existing ADDvantage-32
Drives.
- Provides high performance Ethernet
replacement for 802.4 LAN.
- Upgrades Drive Network while
eliminating costly troubleshooting downtime.
- Can be accomplished during routine
shutdowns, one drive at a time.
|
Key
Features include:
- Embedded Linux Operating System.
- EGD and Proprietary Exchange Service
Protocols supported.
- Application software for communication with
up to (16) ADDvangate-32 Drives and (1) Performance View.
- 6U, Single Slot Eurocard format.
- Intel Pentium III processor.
- 24-bit VME Address (A24) Space Employed.
- Dual 10/100 TX Ethernet Interface Ports
- Front Panel Diagnostic LEDs.
Read More about it! View the sales literature in PDF format. Questions
on PDF? Visit FAQ's
on PDF.
Avtron Industrial Power Resistors
|
Five styles of Industrial Power Resistors. |
Avtron industrial
power resistors are designed for typical industrial applications
ranging from 1 amp to 525 amps and up to 1200 amps for higher voltage
power plant applications. They provide short term overload current
protection.
Avtron resistors work better and cost less. Designs replace existing
resistors without modifying equipment. Avtron can quote and deliver
these items based on the part numbers of the equipment being replaced
and do it faster than most other vendors.
|
| Avtron's quality is unequalled. Fully-supported elements prevent
premature failures by resisting shock and vibration. Unique element
designs allow for maximum cooling to ensure long life. Chromium alloy
and aluminized steel housings provide high reliability and corrosion
protection. Available options include enclosures, wiring and
interconnection, thermal switches, and incorporation into control
systems. |
Applications for Avtron Industrial Resistors include:
- Neutral Grounding Resistors
- Dynamic Braking
- Overhead Cranes
- Electric Lift Trucks
- Mining Machines
- Locomotives
- Harmonic Filters
- Process Heating
- Electric Furnaces
- Convection Heaters
- Load Discharge
- Load Banks
- Ballast Resistors
K679A Rotary Knife Digital Controls
Avtron's Rotary Knife Digital Control System provides the latest in high
precision digital technology for the retrofitting of existing rotary knife
cutters. Mechanical systems can be easily upgraded, allowing faster length
change and more accurate cut length (see examples below).
Additional benefits include:
- Potential increase in machine horsepower
- Increased line speed with higher accuracy
- Less operator attention required
- Automatic sheet counting
- Lower operating cost and maintenance
Jagenberg Sheeter Upgrade Before K679A and
With K679A during Acceleration and Deceleration
Sheet length variation before and after upgrade.
Click here for enlarged view
of graphs.
K677B Splice Controller
The Avtron K677B Digital Splice Control System provides automatic accurate
control for the splicing of the expiring roll and a new roll. Swing arm or
turret operation parameters are conveniently displayed to the splice operator
during the process, to minimize waste and eliminate missed splices. The system
is easily configurable by the operator thus making the system easier to
understand and maintain.
Other system features include:
- Graphical 4-channel signal recorder for diagnostics
- Fast 32-bit controller
- 5" x 9" operator interface with sealed keypad
- One or two core sizes
K895 Line Shaft Draw Controller
The Avtron K895 Digital Speed/Draw Control System is designed for upgrading
line shaft machines, to provide progressive draw control for up to 15 machine
sections. Mechanical belt shifters are interfaced to fast, accurate Digital
controls. Operator stations interface control and display for each section's
Speed and Draw. Each section is coordinated with the others through a
communications serial link.
System capabilities include:
- LED display for each section
- Setpoints entered in percent, ratio or difference draw modes
- Sections can be added one at a time
- Accuracy of 0.01% with one second update time
- User defined draw - progressive, electrical line shaft, or both
- Individually tunable speed/draw, per section
Call Joliet Technologies TODAY
If you have any questions concerning Avtron's Adjustable Speed Drives and
Drive Systems or related products, please contact us by:
Phone (815) 725-9696,
Toll Free (866) 492-9888,
Fax (815) 725-9393 or
E-mail info@joliettech.com
Joliet Technologies custom packages, integrates and engineers
AC Variable Frequency Drives (VFD), DC Variable
Speed Drives (VSD) and
AC Drive Controllers using top of the
line manufacturers, like ABB, Emerson-Control Techniques, Siemens and Saftronics (Fincor). Our custom drive packages
are built to your specifications for your application. We specialize in large horsepower drives (500Hp and above). Call us at (815)
725-9696 or fax us at (815) 725-9393 or e-mail us or fill out an RFQ with your requirements.
|
1724 Tomich Court