Avtron - Tachs, Tachometers, Encoders, Rotary Pulse Generators

Joliet Technologies is the preferred Avtron Integrator for the Chicagoland area.

Tachs, Tachometers, Encoders, Rotary Pulse Generators 

• Sales Literature and Instruction Sheets 
  • Classic Tach Models 
• Price Quotation Request Form 
• Tachometers Availability  
• Heavy, Mill-Duty Encoders  
  • Setting Air Gap on M285 Sensors  
  • M4 Universal Encoder 
  • M56, M67, M85 THIN-LINE
  • M285QUAD Outline Drawing  
• Severe Duty Encoders 
• Mill-Duty Encoders 
  • M3 Universal Encoder 
    • M3 Applications 
    • M3 Installation 
    • M3 Specifications 
• Tach Accessories 
• Tach Solutions 
  • Rugged Environments 
  • Selection by Motor Frame Size 
    • Adapter Kits Outline Drawings 
  • Motors with Brakes 
  • NEMA C Face Mounting 
• Market Specific Applications 

M3 Installation

Installation

Because the M3 is fully self contained, there are no complicated alignment procedures required. Simply slide the M3 onto the shaft, tighten the clamping collar, and connect the anti-rotational bracket to the back of the motor. The M3 does not depend on precise motor tolerances or C-Faces to operate.

Even on motors equipped with machined C-Faces, the Shaft Mounted M3 has advantages because it eliminates coupling and bearing problems associated with the misalignment of shafts and couplings.

Hollow Shaft Installation Sequence

• No Testing Needed
• No Special Tools
• No Mounting Flanges or Couplings

EASY AS...

1. Install Stub Shaft

2. Slide M3 onto Shaft and Tighten Collar

3. Install Torque Arm

Upgrades

The hollow shaft mounting is also very effective for retrofits of existing motors when drive systems are upgraded and the older motors are retained. A complete inventory of shaft adapters to convert just about any motor for M3 compatibility is available from Avtron.

Shaft Grounding Kit

The M3 can be equipped with an integral shaft grounding brush. Shaft grounding brushes have been shown to be effective in reducing motor bearing problems associated with stray shaft currents.

The M3 shaft grounding brush is actually part of the M3 and rides directly on the M3 shaft. No modifications are needed to the motor shaft to use the M3 with the shaft grounding option. The shaft grounding option is available on both solid and hollow shaft designs.

M3 Part Numbers and Available Options

Specifications and features are subject to change without notice.

Call Joliet Technologies TODAY   

If you have any questions concerning Avtron's Tachs, Encoders, and Pulse Generators, please contact us by: 
Phone (815) 725-9696,
Toll Free (866) 492-9888,
Fax (815) 725-9393 or 
E-mail info@joliettech.com