 ABB Component Drives
ACS150, 0.5hp to 5hp Technical Guide
Interface
Options
|
Flashdrop |
FlashDrop is a powerful palm sized tool for fast and easy parameter selecting and
setting. This tool can be used to
download parameters to a drive in as little as two seconds. U sing this tool it is also possible to hide selected parameters to protect the
machine. Only the parameters needed in the application are shown. FlashDrop does
not require the drive to be powered. The drives shipping container is also designed to
allow use of the FlashDrop tool without removing the drive.
|
| NEMA 1 Kit |
|
The NEMA 1 kit MUL1-R1 includes a conduit box and hood for protection against dirt and dust. The
MUL1-R1 covers all ACS150 frame sizes. |
Option Pricing
|
Name |
Description |
Field Kit Code |
Field Kit
Price |
|
ACS 150/350 Programming
Case |
Powered by 115VAC, the Programming Case includes an
ACS150 and ACS350 drive mounted on a panel. Included is an I/O board with switches, pots,
meters and LEDs
permitting remote operation. |
ACS150/350-
PROGCASE |
$1,512.00 |
|
ACS150/350 Display Case |
The Display Case provides an ACS50, ACS150 and an
ACS350 along with options ACS50-POT, MPOT-01, one
Fieldbus Adapter, ACS-CP-A, ACS-CP-C, MFDT-01 and
MTAC-01 mounted loosly inside a foam packed suitcase |
AC150/S350-
DISPCASE |
$1,680.00 |
|
NEMA 1 Enclosure Kit |
This option provides the necessary hardware to modify
the ACS 150 drive from the standard fingersafe protected
chassis to NEMA 1 protection capable of landing conduit.
MUL 1-R 1 is used for frame sizes RO through R2. |
MUL1-R1 |
$51.00 |
|
Flashdrop |
FlashDrop is a powerful palm sized tool for fast and easy
parameter selecting and setting. It gives the possibility to hide selected parameters to protect the machine. Only the parameters needed in the application are shown.
The tool can copy parameters between two drives or between a PC and a drive. Includes DrivePM (Drive parameter manager) which is a tool to create, edit and copy parameter sets for
FlashDrop. The parameter sets can consist of all parameters (incl. motor parameters and ID run results) or only a set of the user parameters. |
MFDT-01 |
$404.00 |
|
(prices good thru July 2008) |
Options
|
Brake resistors |
|
All ACS150 drives are configured with a built-in brake chopper capable of 100% braking. By connecting an external resistor you can enable the dynamic braking
function. The minimum and maximum resistance and the required power is show in the table. Ensure the resistor purchased does
not exceed the maximum resistance nor is smaller than
the minimum resistance. For more information about the selection of brake resistors, see the ACS150 User's Manual. |
Selection table
| Type Code |
Frame
Size |
Rmin
ohm
|
Rmax
ohm |
PBRmax |
| hp |
kW |
|
1-phase supply voltage 200 - 240 V units |
| ACS150-01U-02A4-1 |
R0 |
70 |
390 |
0.5 |
0.37 |
| ACS150-01U-04A7-1 |
R1 |
40 |
200 |
1 |
0.75 |
| ACS150-01U-06A7-1 |
R1 |
40 |
130 |
1.5 |
1.1 |
| ACS150-01U-07A5-1 |
R2 |
30 |
100 |
2 |
1.5 |
| ACS150-01U-09A8-1 |
R2 |
30 |
70 |
3 |
2.2 |
|
3-phase supply voltage 200 - 240 V units |
| ACS150-03U-02A4-2 |
R0 |
70 |
390 |
0.5 |
0.37 |
| ACS150-03U-03A5-2 |
R0 |
70 |
260 |
0.75 |
0.55 |
| ACS150-03U-04A7-2 |
R1 |
40 |
200 |
1 |
0.75 |
| ACS150-03U-06A7-2 |
R1 |
40 |
130 |
1.5 |
1.1 |
| ACS150-03U-07A5-2 |
R1 |
30 |
100 |
2 |
1.5 |
| ACS150-03U-09A8-2 |
R2 |
30 |
70 |
3 |
2.2 |
|
3-phase supply voltage 380 - 480 V units |
| ACS150-03U-01A2-4 |
R0 |
310 |
1180 |
0.5 |
0.37 |
| ACS150-03U-01A9-4 |
R0 |
230 |
800 |
0.75 |
0.55 |
| ACS150-03U-02A4-4 |
R0 |
210 |
500 |
1 |
0.75 |
| ACS150-03U-03A3-4 |
R1 |
150 |
400 |
1.5 |
1.1 |
| ACS150-03U-04A1-4 |
R1 |
130 |
300 |
2 |
1.5 |
| ACS150-03U-05A6-4 |
R1 |
100 |
200 |
3 |
2.2 |
| ACS150-03U-08A8-4 |
R1 |
70 |
110 |
5 |
4 |
© 2006 ABB Inc. ACS150-PHTC01U-EN REV B, Effective: 12/1/05.
Specifications subject to change
without notice.
|
1724 Tomich Court